Dive Flag Regulations

Let's talk tackle, guns, and anything other gear type here.

Dive Flag Regulations

Postby jskingry » Tue Feb 23, 2010 10:59 am

For lack of a better post, here are the state of Florida dive flag regulations.

1. The flag must be square or rectangular. If rectangular, the length must not be less than the height, or more than 25 percent longer than the height. The flag must have a wire or other stiffener to hold it fully unfurled and extended in the absence of a wind or breeze.

2. The flag must be red with a white diagonal stripe that begins at the top staff-side of the flag and extends diagonally to the lower opposite corner. The width of the stripe must be 25 percent of the height of the flag.

3. The minimum size for any divers-down flag displayed on a buoy or float towed by the diver is 12 inches by 12 inches. The minimum size for any divers-down flag displayed from a vessel or structure is 20 inches by 24 inches.

4. Any divers-down flag displayed from a vessel must be displayed from the highest point of the vessel or such other location which provides that the visibility of the divers-down flag is not obstructed in any direction.

For more information on Florida Fish & Wildlife Conservation Commission, please visit www.floridaconservation.org.
Image
User avatar
jskingry
Site Admin
 
Posts: 1797
Joined: Mon Apr 20, 2009 5:23 pm
Location: Hudson, FL

Re: Dive Flag Regulations

Postby ebear » Tue Feb 23, 2010 1:49 pm

Now all we have to do is get the idiots running near a dive flag to learn the rules. :o
TEAM TIN
Tin is in, man
User avatar
ebear
 
Posts: 731
Joined: Mon Apr 20, 2009 10:34 pm
Location: bayport///brooksville


Return to Gear

Who is online

Users browsing this forum: No registered users and 1 guest